Shop – azia-test https://azia-test.com Sun, 10 May 2026 09:56:18 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://azia-test.com/wp-content/uploads/2025/09/cropped-cropped-favicon-32x32.jpeg Shop – azia-test https://azia-test.com 32 32 CO (H2-compensated) replacement sensor https://azia-test.com/en/product/co-h2-compensated-replacement-sensor/ Sat, 25 Oct 2025 13:40:31 +0000 https://azia-test.com/?post_type=product&p=23182 Product number. 0393 0100

Sizdin

  • үшін CO (with compensation H2)
  • Simply replace the sensor yourself on site.
  • Pre-calibrated
Replacement CO sensor (with H2 compensation ) Smoke gas measurement in Ushіn. Extremely practical: you can replace the sensor yourself—the pre-calibrated sensor simply connects to the appropriate flue gas analyzer.

The post CO (H2-compensated) replacement sensor appeared first on azia-test.

]]>
Delivery Scope
1 x CO (H2-compensated) replacement sensor.

Please note: For one-off activation of the measurement parameter in the flue gas analyzer, you need the CO (H2-compensated) retrofit sensor. If the retrofit sensor has to be replaced, use the CO (H2-compensated) replacement sensor.
 
 
Technical data
Flue gas CO (with H₂-compensation)
Measuring range
0 to 10000 ppm
Resolution
1 ppm
 
General technical data
Weight
18 g
Dimensions
40 x 30 x 30 mm (LxWxH)
Product-/housing material
Plastic
Product colour
red
 
Related Products
testo 340 – Flue gas analyzer for use in industry
 
Product no.:
0632 3340

The post CO (H2-compensated) replacement sensor appeared first on azia-test.

]]> 23182 CO (H2-compensated) replacement sensor https://azia-test.com/en/product/%d0%b3%d0%b0%d0%b7-%d0%b0%d0%bd%d0%b0%d0%bb%d0%b8%d0%b7%d0%b0%d1%82%d0%be%d1%80%d1%8b%d0%bd%d0%b0-%d0%b0%d1%80%d0%bd%d0%b0%d0%bb%d2%93%d0%b0%d0%bd-testo-350-co-%d0%bc%d0%be%d0%b4%d1%83%d0%bb%d1%96/ Tue, 14 Oct 2025 11:14:03 +0000 https://azia-test.com/?post_type=product&p=21878 Product no. 0393 0104

Your advantages
  • For measuring CO (H2-compensated)
  • Simply change sensor yourself on site
  • Precalibrated
CO (H2-compensated) replacement sensor for flue gas measurement. Particularly practical: you can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.

The post CO (H2-compensated) replacement sensor appeared first on azia-test.

]]>
Delivery Scope

1 x CO (H2-compensated) replacement sensor.

Please note: For one-off activation of the measurement parameter in the flue gas analyzer, you need the CO (H2-compensated) retrofit sensor. If the retrofit sensor has to be replaced, use the CO (H2-compensated) replacement sensor.

 
 
Technical data

 

Flue gas CO (with H₂-compensation)

Measuring range
0 to 10000 ppm
Resolution
1 ppm
 
General technical data
Weight
18 g
Dimensions
40 x 30 x 30 mm (LxWxH)
Product-/housing material
Plastic
Product colour
red
 
Related Products
testo 350 — аналитический блок для систем анализа выхлопных газов
testo 350 – Analysis Box for exhaust gas analysis systems
 
Product no.:
0632 3510

The post CO (H2-compensated) replacement sensor appeared first on azia-test.

]]> 21878 O2 replacement sensor https://azia-test.com/en/product/testo-340-o2-module-for-gas-analyzer/ Tue, 14 Oct 2025 07:22:34 +0000 https://azia-test.com/?post_type=product&p=21824 Product no. 0393 0000

Your advantages
  • For measuring O2
  • Simply change sensor yourself on site
  • Precalibrated
O2 replacement sensor for flue gas measurement. Particularly practical: you can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.

The post O2 replacement sensor appeared first on azia-test.

]]>
Delivery Scope
1 x O2 replacement sensor.
 
 
Technical data
Flue gas O₂
Measuring range
0 to 25 Vol.%
Resolution
0.01 Vol.%
 
General technical data
Weight
38 g
Dimensions
40 x 30 x 30 mm (LxWxH)
Product-/housing material
Plastic
Product colour
grey; white
 
Related Products
testo 340 – Flue gas analyzer for use in industry
 
Product no.:
0632 3340
testo 350 — аналитический блок для систем анализа выхлопных газов
testo 350 – Analysis Box for exhaust gas analysis systems
 
Product no.:
0632 3510

The post O2 replacement sensor appeared first on azia-test.

]]> 21824 testo 608-H2 hygrometer with alarm, humidity/dew point/temperature https://azia-test.com/en/product/testo-608-h2-hygrometer-with-alarm-humidity-dew-point-temperature-2/ Thu, 02 Oct 2025 11:13:49 +0000 https://azia-test.com/?post_type=product&p=21109 The post testo 608-H2 hygrometer with alarm, humidity/dew point/temperature appeared first on azia-test.

]]>

Order Number: 0560 6082

Registered in the Registry of the State System for Ensuring the Uniformity of Measurements of the Republic of Kazakhstan
on 28.01.2021 under No. KZ.02.01.00878-2020
Valid until 28.01.2026

—

Technical Data
DisplayLCD, 2 lines
Storage Temperature-40 … +70 °C
Operating Temperature-10 … +70 °C
Battery Type9V
Battery Life8736 hours
Weight168 g
Dimensions120 x 89 x 40 mm
NTC Probe
Measurement Range-10 … +70 °C
Accuracy±0.5 °C
Resolution0.1 °C
Capacitive Humidity Sensor
Measurement Range+2 … +98 % RH
Accuracy±2 % RH
Resolution0.1 % RH

The post testo 608-H2 hygrometer with alarm, humidity/dew point/temperature appeared first on azia-test.

]]> 21109 Testo 905–T2, thermometer https://azia-test.com/en/product/testo-905-t2-thermometer-2/ Wed, 01 Oct 2025 14:27:20 +0000 https://azia-test.com/?post_type=product&p=21227 Device Advantages:

  • Wide measurement range
  • Fast response time
  • Spring thermocouple strap adapts to any surface
  • High accuracy
  • Rotating display makes it easy to read the measured value

The post Testo 905–T2, thermometer appeared first on azia-test.

]]>

Order Number: 0560 9056

Registered in the State System for Ensuring the Uniformity of Measurements of the Republic of Kazakhstan on 30.06.2021 under No. KZ.02.01.01098-2021 (type designation). Valid until 30.06.2026.

Technical Data
Measurement Range-50 … +350 °C (temporarily up to +500 °C)
Resolution0.1 °C
Accuracy±(1 °C ± 1% of measured value) (-50°С … +99.9 °C)
SensorsType K thermocouple
Selectable Units°C, °F
Operating Temperature0 … 40 °C
Battery TypeAlkaline (3 x AAAA)
Dimensions230 x 37 x 36 mm

The post Testo 905–T2, thermometer appeared first on azia-test.

]]> 21227 Testo 905–T2, thermometer https://azia-test.com/en/product/testo-905-t2-thermometer/ Wed, 01 Oct 2025 14:23:37 +0000 https://azia-test.com/?post_type=product&p=21214 Advantages of the device:

Wide measurement range
Fast response time
The spring-loaded thermocouple strap adapts to any surface
High accuracy
Rotating display makes it easy to read the measured value

The post Testo 905–T2, thermometer appeared first on azia-test.

]]>

Номер заказа: 0560 9056

Зарегистрирован в реестре государственной системы обеспечения единства измерений Республики Казахстан 30.06.2021 года за № KZ.02.01.01098-2021 обозначение типа. Действителен до 30.06.2026 года.

 

 
Технические данные
Диапазон измерения-50 … +350 °С (кратковременно до +500 °С)
Разрешение0,1 °С
Погрешность+/- (1 °С +/- 1 % от измер. величины) (-50°С … +99,9 °С)
СенсорыТермопара типа К
Выбираемые единицы°С, °F
Рабочая температура0 … 40 °С
Тип батареиAlcaline (3 x AAAA)
Размеры230 x 37 x 36 мм

The post Testo 905–T2, thermometer appeared first on azia-test.

]]> 21214 testo 608-H2 hygrometer with alarm, humidity/dew point/temperature https://azia-test.com/en/product/testo-608-h2-hygrometer-with-alarm-humidity-dew-point-temperature/ Wed, 01 Oct 2025 13:53:33 +0000 https://azia-test.com/?post_type=product&p=21110 A reliable and precise humidity sensor is essential for measurements you and your customer can trust. The testo 608 is equipped with the patented Testo® humidity sensor, whose accuracy is validated by seven national standardization laboratories worldwide, allowing you to perform measurements with confidence.

  • All advantages of the testo 608-H1
  • Optical alarm signal when exceeding upper or lower set points for temperature, humidity, or dew point
  • Guaranteed accuracy: ±2 % RH across the entire measurement range
  • Includes calibration protocol
  • Built-in calibration function using the Testo reference system

The post testo 608-H2 hygrometer with alarm, humidity/dew point/temperature appeared first on azia-test.

]]>

Order Number: 0560 6082

Registered in the Registry of the State System for Ensuring the Uniformity of Measurements of the Republic of Kazakhstan
on 28.01.2021 under No. KZ.02.01.00878-2020
Valid until 28.01.2026

Technical Data
DisplayLCD, 2 lines
Storage Temperature-40 … +70 °C
Operating Temperature-10 … +70 °C
Battery Type9V
Battery Life8736 hours
Weight168 g
Dimensions120 x 89 x 40 mm
NTC Probe
Measurement Range-10 … +70 °C
Accuracy±0.5 °C
Resolution0.1 °C
Capacitive Humidity Sensor
Measurement Range+2 … +98 % RH
Accuracy±2 % RH
Resolution0.1 % RH

The post testo 608-H2 hygrometer with alarm, humidity/dew point/temperature appeared first on azia-test.

]]> 21110 testo 405 – thermal anemometer https://azia-test.com/en/product/testo-405-%d1%82%d0%b5%d1%80%d0%bc%d0%b8%d1%87%d0%b5%d1%81%d0%ba%d0%b8%d0%b9-%d0%b0%d0%bd%d0%b5%d0%bc%d0%be%d0%bc%d0%b5%d1%82%d1%80-2/ Wed, 01 Oct 2025 13:35:01 +0000 https://azia-test.com/?post_type=product&p=21054 Measures air velocity, volume flow, and temperature.

Measuring air velocity with the new Pocket-line device.
The Testo 405 is a thermal anemometer. It measures air velocity, volume flow, and temperature.

Calculates volume flow rates up to 99,990 m³/h
Ideal for duct measurements
Telescopic telescope up to 300 mm
The Testo 405 is a thermal anemometer with a holder, including a battery.

The post testo 405 – thermal anemometer appeared first on azia-test.

]]>
Технические данные

Номер заказа: 0560 4053

Зарегистрирован в реестре государственной системы обеспечения единства измерений Республики Казахстан
27.12.2021 года за № KZ.02.01.01360-2021
Действителен до 27.12.2026 года

 

 
Технические данные
Тип зондаТермическийNTC
Измеряемые параметрыСкорость, Объемный расходТемпература
Диапазон измерений0 … 10 м/с
0 … 99990 м³/ч		-20 … +50 °C
Погрешность±(0.1 м/с + 5 % v.Mw.) (0 … +2 м/с)
±(0.3 м/с + 5% v.Mw.) (оставшийся диапазон)		±0.5 °C
Разрешение0.01 м/с0.1 °C
Общие технические данные
Рабочая температура0…+50 °C
Время работыоколо 20 часов
Температура хранения-20 … +70 °C
Габариты490 x 37 x 36 мм

The post testo 405 – thermal anemometer appeared first on azia-test.

]]> 21054 testo 830-T2, infrared thermometer with 2-point laser pointer https://azia-test.com/en/product/testo-830-t2-infrared-thermometer-with-2-point-laser-pointer/ Wed, 01 Oct 2025 09:30:50 +0000 https://azia-test.com/?post_type=product&p=20700 Adjustable setpoint values, alarm function, and socket for connecting an additional probe

Infrared thermometer with 2-point laser targeting, adjustable setpoint values, alarm function, and socket for connecting additional probes:

  • Fast recording of measured values
  • Laser targeting
  • Adjustable setpoint values
  • Acoustic and optical signal when setpoint values are exceeded
  • Ergonomic pistol-shaped design for easy handling
  • Illuminated display
  • Adjustable emissivity (from 0.2 to 1.0)
  • 2-point laser targeting
  • Precise 12:1 optics allows effective measurements over long distances
  • Additional temperature probe can be connected
  • Emissivity can be determined via contact measurements
  • Option to supply a kit with a high-performance temperature probe

The post testo 830-T2, infrared thermometer with 2-point laser pointer appeared first on azia-test.

]]>
Registration information in the Republic of Kazakhstan (Order number 0560 8302)
Registration number in the GS OEI RK Register:KZ.02.02.03468-2013
Registration date:«01» July 2013
Valid until:«01» July 2018
Technical Data
Measurement Characteristics
ParameterInfrared MeasurementContact Measurement (Type K)
Measurement range:-30 … +400 °C-50 … +500 °C
Resolution:0.5 °C0.1 °C
Error (+0.1 … +400 °C):±1.5 °C or ±1.5% of measured value (±1 digit at +23 °C) 
Error (-30 … 0 °C):±2 °C or ±2% of measured value (±1 digit at +23 °C) 
Error (Contact): ±(0.5 °C + 0.5% of measured value)
General Technical Specifications
Operating temperature:-20 … +50 °C
Storage temperature:-40 … +70 °C
Weight:200 g
Battery type:9V block-type “Krona” battery
Battery life:15 h

The post testo 830-T2, infrared thermometer with 2-point laser pointer appeared first on azia-test.

]]> 20700 testo 831, remote thermometer for infrared control measurement https://azia-test.com/en/product/testo-831-remote-thermometer-for-infrared-control-measurement/ Wed, 01 Oct 2025 09:25:53 +0000 https://azia-test.com/?post_type=product&p=20686 The measurement spot diameter through the 30:1 optics is only 3.6 cm at a distance of 1 meter. This means that even small objects, such as a yogurt cup, can be measured from a distance. Through the laser marking point, the exact diameter of the measurement area is visible, eliminating errors during measurement. The Testo 831 can perform 2 measurements per second, allowing scanning of trays or cooling shelves in seconds.

Testo 831, Infrared Thermometer
Includes belt holder, batteries, user manual, and factory calibration protocol with measurement points at -20°C and +80°C.

Testo 831 and Testo 106 Set
The Testo 831 and Testo 106 set – infrared thermometer, including belt holder, battery, user manual, calibration protocol with measurement points at -20°C and +80°C, and penetration thermometer Testo 106, including TopSafe, belt holder, battery, and user manual.
Order number: 0563 8310

Accessories
ISO calibrated temperature certificate, infrared 0520 0401
Measuring instrument, calibration points: 18°C, 0°C, +60°C

ISO calibrated temperature certificate, infrared 0520 0452
Measuring instrument, calibration points: 0°C, +60°C

The post testo 831, remote thermometer for infrared control measurement appeared first on azia-test.

]]>
Registration Information in the Republic of Kazakhstan (Order number 0560 8310)
Registration number in the GS OEI RK Register:KZ.02.02.03468-2013
Registration date:“01” July 2013
Valid until:“01” July 2018
Technical Data
Infrared Measurement
Type of probe:infrared
Measurement range:-30 °C … +210 °C
Spectral range:8 …14 qm
Distance to measurement spot (Optics):30:1
Resolution:0.5 °C
Accuracy (-20 … -2.10 °C):±2 °C or ±2% of measured value (±1 digit)
Accuracy (rest of the range):±1.5 °C or ±1.5% of measured value (±1 digit)
General Specifications
Operating temperature:-20 … +50 °C
Storage temperature:-40 … +70 °C
Display:illuminated LCD display
Protection class:IP 30
Battery type:9 V block battery
Battery life:15 hours
Dimensions:80 x 31 x 19 mm
Weight:28 kg
Warranty:2 years

The post testo 831, remote thermometer for infrared control measurement appeared first on azia-test.

]]> 20686