testo 535, CO2 measuring instrument

Related products

• 

  Read more

  testo 316-EX, Electronic gas leak detector testo 316-EX

  Includes batteries, case, hex key, and factory calibration certificate

  Approved according to ATEX (94/9/EC)

  Flexible measuring sensor for hard-to-reach areas

  Can detect 3 different types of gas: methane, propane, and hydrogen

  The testo 316-EX gas leak detector helps you locate gas leaks, and thanks to its ATEX protection, it can even be used in potentially explosive areas. Gas detection and leak detection are possible on both indoor and outdoor gas pipelines and installations.

  When checking gas pipeline components for leaks or detecting a gas leak, a gas detection device with ATEX protection must be used. This is because, in a hazardous situation, it is essential to ensure that the gas measuring technology used does not trigger an explosion due to its own portable ignition sources.

  This ATEX protection is provided by the testo 316-EX gas leak detector (ATEX approval 94/9/EC). The multi-range gas detection device can identify methane, propane, and hydrogen. Gas concentrations are measured by a semiconductor sensor in the ppm range and displayed on the screen with a resolution of 1 ppm. Thanks to its flexible measuring sensor, gas leak detection can be performed even in hard-to-reach areas.

• 

  Read more

  O2 replacement sensor

  Product no. 0393 0000

  Your advantages

  • For measuring O₂
  • Simply change sensor yourself on site
  • Precalibrated

  O₂ replacement sensor for flue gas measurement. Particularly practical: you can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.
• 

  Read more

  testo 315-3, Measuring instrument for carbon monoxide and carbon dioxide concentration

  Instrument for measuring CO and CO2 in ambient air, as well as relative humidity and air temperature.

  The testo 315-3 instrument is for measuring the concentration of carbon monoxide (CO) and carbon dioxide (CO2) in ambient air, as well as relative humidity and air temperature.

  During combustion processes, the composition of the ambient air continuously changes. Certain CO and CO2 concentrations pose a danger to humans. To monitor these parameters, measurements must be conducted in various areas.

  With the testo 315-3, specialists in the installation and service maintenance of heating systems can perform higher quality monitoring of gas heating equipment installed in residential buildings, office buildings, or industrial enterprises.

  The testo 315-3 is equipped with a high-precision electrochemical CO sensor and a load-resistant infrared CO2 sensor.

  Thanks to its robust design and the optional TopSafe protective case, the instrument is reliably protected against external influences. During measurements, the instrument will alert you to the exceedance of set limit values through optical and acoustic signals. Thanks to the IrDA or Bluetooth (optional) interfaces, you can transfer the obtained data to the testo 330 flue gas analyzer or print them out. This provides a good opportunity for documenting measurement results directly on site. The automatic shut-off function and the rechargeable lithium-polymer battery ensure long operating time and help avoid unnecessary energy consumption.

  Advantages of the instrument:

  • Simultaneous measurement of CO and CO
    2
    ​
  • Measurement of relative humidity and air temperature (optional)
  • Convenient and simple operation
  • Printing data directly on site using an optional printer
  • Data transfer capability to testo 330 (ver. 2010)
  • Display backlight
  • Audible and optical alarm upon exceeding limit values
  • Automatic shut-off function
    Compliance with standard EN 50543
• 

  Read more

  testo 350, Professional portable flue gas analyzer for industry

  testo 350 Control Unit
  Testo 350 Control Unit, rechargeable battery, data memory, USB cable, port for the testo data bus.
  Order No. 0632 3511

  Questionnaire for ordering the testo 350 Flue Gas Analyzer

  • The ability to control the Analyzer Box and transmit measurement data even when monitoring is carried out from a point remote from the chimney, which is especially convenient when performing measurements, for example, on industrial burners.
  • The ability to transfer measurement data from the Analyzer Box to the Control Unit allows the Control Unit to be removed from the Analyzer Box and moved to another location to analyze the data obtained, while the Analyzer Box remains in place to continue measurements.
  • To protect the testo 350 display from damage during long-term measurements or while transporting the analyzer from one site to another, the Control Unit can be installed in the Analyzer Box in a face-down position.
  • Large color graphic display, robust housing for industrial use.
    The Control Unit complements the testo 350 Analyzer Box (ordered separately), allowing you to control emission measurement. The testo 350 flue gas analyzer meets the highest requirements for industrial emission analysis: ease of operation, precise measuring technology, and a robust design perform excellently in daily use.