Showing all 11 results
-
CO (H2-compensated) replacement sensor
Order no: 0393.0104
Product no. 0393 0104
Your advantages- For measuring CO (H2-compensated)
- Simply change sensor yourself on site
- Precalibrated
CO (H2-compensated) replacement sensor for flue gas measurement. Particularly practical: you can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer. -
CO (H2-compensated) replacement sensor
Order no: 0393.0100
Product number. 0393 0100
Sizdin- үшін CO (with compensation H2)
- Simply replace the sensor yourself on site.
- Pre-calibrated
Replacement CO sensor (with H2 compensation ) Smoke gas measurement in Ushіn. Extremely practical: you can replace the sensor yourself—the pre-calibrated sensor simply connects to the appropriate flue gas analyzer.O2 replacement sensor
Order no: 0393.0000
Product no. 0393 0000
Your advantages- For measuring O2
- Simply change sensor yourself on site
- Precalibrated
O2 replacement sensor for flue gas measurement. Particularly practical: you can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.testo 300, Flue gas analyzer kit (O2, CO with H2-compensation up to 8,000 ppm, NO)
Order no: 0564.3004.02
Catalogtesto 300 flue gas analyzer kit, including O2 module, CO with H2-compensation up to 8,000 ppm, NO, 300 mm probe, Ø 8, 10 spare filters, plastic case, power supply unit
Perform installation and maintenance of heating systems multiple times a day using the testo 300 flue gas analyzer.
testo 300, Flue gas analyzer kit (O2, CO without H2-compensation up to 4,000 ppm)
Order no: 0564.3002.86
Catalogtesto 300 flue gas analyzer kit, including O2
module, CO without H2
-compensation up to 4,000 ppm, 300 mm probe, Ø 8, 10 spare filters, plastic case, power supply unitPerform installation and maintenance of heating systems multiple times a day using the testo 300 flue gas analyzer.
testo 310 – Compact flue gas analyzer
Order no: 0563.3106.10
CatalogThe compact flue gas analyzer offers you menu guidance with four built-in measurement menus for flue gas, draft, CO content, and pressure parallel to a simple control interface. All measurement results are displayed on the screen at a glance and are even customizable thanks to the high-resolution graphic display.
The testo 310 flue gas analyzer can be attached to metal surfaces, such as a burner, using magnets on the back of the instrument. But that’s not the only convenient feature: with the Testo Smart App, you have the ability to control and configure your device using the remote access function.
A robust design for harsh and dirty operating conditions, fast sensor zeroing in 30 seconds, an easily replaceable probe filter, and a quickly drainable condensate collection tank make the flue gas analyzer an optimal tool for installation mechanics, because it is thoughtfully designed down to the smallest detail.
If necessary, measurement results can be transferred via the $\text{Bluetooth}\textsuperscript{\textregistered}$ interface to an optional Testo Fast Printer or sent by e-mail and printed directly on site.
Areas of Application:
- Flue gas analysis
- Draft measurement
- CO concentration measurement in the ambient air
- Pressure measurement
testo 315-3, Measuring instrument for carbon monoxide and carbon dioxide concentration
Order no: 0632.3153
CatalogInstrument for measuring CO and CO2 in ambient air, as well as relative humidity and air temperature.
The testo 315-3 instrument is for measuring the concentration of carbon monoxide (CO) and carbon dioxide (CO2) in ambient air, as well as relative humidity and air temperature.
During combustion processes, the composition of the ambient air continuously changes. Certain CO and CO2 concentrations pose a danger to humans. To monitor these parameters, measurements must be conducted in various areas.
With the testo 315-3, specialists in the installation and service maintenance of heating systems can perform higher quality monitoring of gas heating equipment installed in residential buildings, office buildings, or industrial enterprises.
The testo 315-3 is equipped with a high-precision electrochemical CO sensor and a load-resistant infrared CO2 sensor.
Thanks to its robust design and the optional TopSafe protective case, the instrument is reliably protected against external influences. During measurements, the instrument will alert you to the exceedance of set limit values through optical and acoustic signals. Thanks to the IrDA or Bluetooth (optional) interfaces, you can transfer the obtained data to the testo 330 flue gas analyzer or print them out. This provides a good opportunity for documenting measurement results directly on site. The automatic shut-off function and the rechargeable lithium-polymer battery ensure long operating time and help avoid unnecessary energy consumption.
Advantages of the instrument:
- Simultaneous measurement of CO and CO
2
- Measurement of relative humidity and air temperature (optional)
- Convenient and simple operation
- Printing data directly on site using an optional printer
- Data transfer capability to testo 330 (ver. 2010)
- Display backlight
- Audible and optical alarm upon exceeding limit values
- Automatic shut-off function
Compliance with standard EN 50543
testo 317-3, CO monitor
Order no: 0632.3173
CatalogIncludes transport bag, headphones, wrist strap, belt clip, factory calibration protocol.
Zeroing of the CO cell at the measurement site
Optical and acoustic alarm signal when limit values are exceeded
Three-year warranty on the CO measuring cell
Self-diagnosis function
testo 340, Flue gas analyzer for 4 measured gases
Order no: 0632.3400
CatalogThe compact form and accessible technology make the testo 340 gas analyzer ideal for operation, service, and maintenance, as well as for control measurements of industrial boilers, gas turbines, stationary industrial engines, and thermal processes.
Advantages of the testo 340 gas analyzer:
1. Maximum number of sensors: 4. The instrument is equipped with an O2 sensor as standard. You can configure 3 additional sensors yourself from a selection of: CO (with H2-compensation), CO low (with H2-compensation), NO, NO low, NO2, and SO2.
2. The gas analyzer has a built-in function for differential pressure and velocity measurement as standard.
3.The CO (with H2-compensation) and NO sensors come with replaceable filters. This filter prevents certain gases from passing through the sensor. If the filter is worn, the user can replace it independently.
4. Optimal protection safeguards the instrument against impact.
testo 350, Professional portable flue gas analyzer for industry
Order no: 0632.3511
Catalogtesto 350 Control Unit
Testo 350 Control Unit, rechargeable battery, data memory, USB cable, port for the testo data bus.
Order No. 0632 3511Questionnaire for ordering the testo 350 Flue Gas Analyzer
- The ability to control the Analyzer Box and transmit measurement data even when monitoring is carried out from a point remote from the chimney, which is especially convenient when performing measurements, for example, on industrial burners.
- The ability to transfer measurement data from the Analyzer Box to the Control Unit allows the Control Unit to be removed from the Analyzer Box and moved to another location to analyze the data obtained, while the Analyzer Box remains in place to continue measurements.
- To protect the testo 350 display from damage during long-term measurements or while transporting the analyzer from one site to another, the Control Unit can be installed in the Analyzer Box in a face-down position.
- Large color graphic display, robust housing for industrial use.
The Control Unit complements the testo 350 Analyzer Box (ordered separately), allowing you to control emission measurement. The testo 350 flue gas analyzer meets the highest requirements for industrial emission analysis: ease of operation, precise measuring technology, and a robust design perform excellently in daily use.
testo 535, CO2 measuring instrument
Order no: 0563.0535
CatalogGas analyzer with app connectivity and acoustic alarm, transport bag, batteries, and factory calibration protocol
Simple, fast, and accurate CO2
concentration measurement
Acoustic alarm when limit values are exceeded
Fast configuration in the app, graphical history, second screen, and storage of measurement data in the testo Smart AppHigh reproducibility of measurement results thanks to the long-term stable infrared sensor system
The testo 535 gas analyzer is ideally suited for simple, fast, and accurate determination of carbon dioxide levels to ensure indoor air quality and, consequently, health and productivity. Connecting to the intelligent testo App allows you to configure, display, store, and document readings directly within the app.




