- Your cart is empty Browse Shop
Showing 37–48 of 137 results
-
testo 310 – Compact flue gas analyzer
Order no: 0563.3106.10
CatalogThe compact flue gas analyzer offers you menu guidance with four built-in measurement menus for flue gas, draft, CO content, and pressure parallel to a simple control interface. All measurement results are displayed on the screen at a glance and are even customizable thanks to the high-resolution graphic display.
The testo 310 flue gas analyzer can be attached to metal surfaces, such as a burner, using magnets on the back of the instrument. But that’s not the only convenient feature: with the Testo Smart App, you have the ability to control and configure your device using the remote access function.
A robust design for harsh and dirty operating conditions, fast sensor zeroing in 30 seconds, an easily replaceable probe filter, and a quickly drainable condensate collection tank make the flue gas analyzer an optimal tool for installation mechanics, because it is thoughtfully designed down to the smallest detail.
If necessary, measurement results can be transferred via the $\text{Bluetooth}\textsuperscript{\textregistered}$ interface to an optional Testo Fast Printer or sent by e-mail and printed directly on site.
Areas of Application:
- Flue gas analysis
- Draft measurement
- CO concentration measurement in the ambient air
- Pressure measurement
-
testo 315-3, Measuring instrument for carbon monoxide and carbon dioxide concentration
Order no: 0632.3153
CatalogInstrument for measuring CO and CO2 in ambient air, as well as relative humidity and air temperature.
The testo 315-3 instrument is for measuring the concentration of carbon monoxide (CO) and carbon dioxide (CO2) in ambient air, as well as relative humidity and air temperature.
During combustion processes, the composition of the ambient air continuously changes. Certain CO and CO2 concentrations pose a danger to humans. To monitor these parameters, measurements must be conducted in various areas.
With the testo 315-3, specialists in the installation and service maintenance of heating systems can perform higher quality monitoring of gas heating equipment installed in residential buildings, office buildings, or industrial enterprises.
The testo 315-3 is equipped with a high-precision electrochemical CO sensor and a load-resistant infrared CO2 sensor.
Thanks to its robust design and the optional TopSafe protective case, the instrument is reliably protected against external influences. During measurements, the instrument will alert you to the exceedance of set limit values through optical and acoustic signals. Thanks to the IrDA or Bluetooth (optional) interfaces, you can transfer the obtained data to the testo 330 flue gas analyzer or print them out. This provides a good opportunity for documenting measurement results directly on site. The automatic shut-off function and the rechargeable lithium-polymer battery ensure long operating time and help avoid unnecessary energy consumption.
Advantages of the instrument:
- Simultaneous measurement of CO and CO
2
- Measurement of relative humidity and air temperature (optional)
- Convenient and simple operation
- Printing data directly on site using an optional printer
- Data transfer capability to testo 330 (ver. 2010)
- Display backlight
- Audible and optical alarm upon exceeding limit values
- Automatic shut-off function
Compliance with standard EN 50543
- Simultaneous measurement of CO and CO
-
testo 317-3, CO monitor
Order no: 0632.3173
CatalogIncludes transport bag, headphones, wrist strap, belt clip, factory calibration protocol.
Zeroing of the CO cell at the measurement site
Optical and acoustic alarm signal when limit values are exceeded
Three-year warranty on the CO measuring cell
Self-diagnosis function
-
testo 340, Flue gas analyzer for 4 measured gases
Order no: 0632.3400
CatalogThe compact form and accessible technology make the testo 340 gas analyzer ideal for operation, service, and maintenance, as well as for control measurements of industrial boilers, gas turbines, stationary industrial engines, and thermal processes.
Advantages of the testo 340 gas analyzer:
1. Maximum number of sensors: 4. The instrument is equipped with an O2 sensor as standard. You can configure 3 additional sensors yourself from a selection of: CO (with H2-compensation), CO low (with H2-compensation), NO, NO low, NO2, and SO2.
2. The gas analyzer has a built-in function for differential pressure and velocity measurement as standard.
3.The CO (with H2-compensation) and NO sensors come with replaceable filters. This filter prevents certain gases from passing through the sensor. If the filter is worn, the user can replace it independently.
4. Optimal protection safeguards the instrument against impact.
-
testo 350, Professional portable flue gas analyzer for industry
Order no: 0632.3511
Catalogtesto 350 Control Unit
Testo 350 Control Unit, rechargeable battery, data memory, USB cable, port for the testo data bus.
Order No. 0632 3511Questionnaire for ordering the testo 350 Flue Gas Analyzer
- The ability to control the Analyzer Box and transmit measurement data even when monitoring is carried out from a point remote from the chimney, which is especially convenient when performing measurements, for example, on industrial burners.
- The ability to transfer measurement data from the Analyzer Box to the Control Unit allows the Control Unit to be removed from the Analyzer Box and moved to another location to analyze the data obtained, while the Analyzer Box remains in place to continue measurements.
- To protect the testo 350 display from damage during long-term measurements or while transporting the analyzer from one site to another, the Control Unit can be installed in the Analyzer Box in a face-down position.
- Large color graphic display, robust housing for industrial use.
The Control Unit complements the testo 350 Analyzer Box (ordered separately), allowing you to control emission measurement. The testo 350 flue gas analyzer meets the highest requirements for industrial emission analysis: ease of operation, precise measuring technology, and a robust design perform excellently in daily use.
-
testo 405 – thermal anemometer
Order no: 0560.4053
CatalogMeasures air velocity, volume flow, and temperature.
Measuring air velocity with the new Pocket-line device.
The Testo 405 is a thermal anemometer. It measures air velocity, volume flow, and temperature.Calculates volume flow rates up to 99,990 m³/h
Ideal for duct measurements
Telescopic telescope up to 300 mm
The Testo 405 is a thermal anemometer with a holder, including a battery. -
testo 405 – thermal anemometer
Allows measurement of air velocity, volume flow, and temperature.
Measure air velocity with the new Pocket-line series instrument.
The Testo 405 is a thermal anemometer that allows measurement of air velocity, volume flow, and temperature.- Volume flow calculation up to 99,990 m³/h
- Ideal for duct measurements
- Telescopic probe extendable up to 300 mm
Testo 405 – thermal anemometer with holder, including battery.
-
testo 405i, a thermal anemometer controlled by smartphone/tablet
Order no: 0560.1405
CatalogIncluding a telescopic probe tube (max. length 400 mm), batteries, and factory calibration protocol
- Measurement of air flow velocity, volume flow, and air temperature
- Simple input of the duct geometry and dimensions for determining the volume flow
- Convenient operation in air ducts thanks to the telescopic probe tube with a maximum length of 400 mm
- Easy control via the testo Smart Probes mobile app (simple data viewing, monitoring of measurement changes, data recording function)
-
testo 410-1 air flow and temperature measuring instrument
Order no: 0560.4101
CatalogTesto 410-1
Includes wrist strap, belt-mounted case, and factory calibration protocol
The Testo 410-1 measures air flow velocity and air temperature. The instrument is ideal for spot measurements at air outlets thanks to its built-in 40 mm vane. It also allows calculation of the time-based mean value. Testo ensures accurate measurements and effortless monitoring of environmental conditions.
Advantages of Testo 410-1
- Measurement of air flow velocity
- Built-in 40 mm vane
- Time-based mean value calculation
- HOLD function for freezing current readings and displaying min/max values
- Display backlight
- Protective cap for safe instrument storage
-
Testo 410-2 anemometer with built-in vane and humidity sensor
Order no: 0560.4102
CatalogWith NTC air temperature sensor, including protective cap, batteries, and factory calibration protocol
Testo 410-2 is designed for measuring air flow velocity, temperature, and humidity. The patented, long-term stable Testo humidity sensor ensures precise and reliable measurement results.
Thanks to the built-in 40 mm vane, the instrument is ideally suited for quick spot measurements in air ducts. Time-based averaging is possible. The compact design makes it very convenient to use.- Simultaneous measurement of air flow velocity and air temperature
- Calculation of time-based mean value
- Hold function for freezing the current reading and display of max/min values
- Wind chill calculation for outdoor applications
- Backlit display
- Protective cap for safe storage
- Scope of delivery: wrist strap, belt pouch, and factory calibration protocol
- Measurement of air humidity with the long-term stable Testo humidity sensor
- Calculation of dew point and wet bulb temperature
- Built-in 40 mm vane
-
testo 410i, anemometer for use with an app
Order no: 0560.1410
CatalogIncludes batteries and calibration protocol
The testo 410i is a smart probe for measuring air flow velocity, temperature, and calculating air volume flow.
This probe connects to your tablet or smartphone via Bluetooth and is operated directly through the free mobile app.
With the Testo Smart Probes app, your smartphone or tablet becomes the display of the instrument.
Measurement control and data transmission are performed via Bluetooth.
You can also create reports, add photos and comments, and save or export them in Excel or PDF format (for Android), or PDF (for iOS) via email.Technical Specifications of the Testo 410i Probe
Sensor type: Hot wire anemometer
Measuring range: 0.4 to 30 m/s
Accuracy: ±(0.2 m/s + 2% of measured value) in the range 0.4 to +20 m/s
Resolution: 0.1 m/sSensor type: NTC
Measuring range: -20 to +60 °C
Accuracy: ±0.5 °C
Resolution: 0.1 °C -
testo 416, vane anemometer, 16 mm diameter, with app connection
Order no: 0563.0416
Catalogwith a transport bag, batteries, and factory calibration protocol
Simple, fast, and precise measurement of flow velocity and calculation of air volume flow in ventilation ducts.
Greater flexibility during duct measurements thanks to the wired telescopic probe (maximum length 850 mm).
Quick configuration via the app (duct settings), graphical data display, second screen functionality, and measurement data storage in the testo Smart App.
Time-based and point-based averaging.
The compact testo 416 vane anemometer with a 16 mm telescopic probe and app connectivity is ideal for simple, fast, and precise determination of air velocity and volume flow in ventilation ducts of air conditioning and ventilation systems.
By connecting to the testo Smart App, you can configure the instrument, display readings (including as a second screen), store and document measurement data directly within the app.